Synthetic Anti-Wear Hydraulic Oil – ISO 32

An industry leading quality which performance can’t be matched.

Due to the niche market of this product  – well it’s widely used but very few take the time to understand the full benefits relating to cost per use and extended performance and equipment life. So we only stock it as customers call in advance or per their repeat needs. Please call in advance if you need this in the Omaha area.

AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to help prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Oils contain a very effective zinc-based anti-wear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. Improved pump efficiency can increase hydraulic power, reduce fuel consumption and improve productivity. AW Oils are designed for long life and can typically reduce maintenance costs by extending drain intervals and reducing labor costs, repairs and downtime.

Check Price & Buy

 

Synthetic Anti-Wear Hydraulic Oil - ISO 32AMSOIL ISO-32 Synthetic Base Oil Technology

AMSOIL synthetic base oils resist thermal and oxidative breakdown, reducing varnish deposits. The very high viscosity indices, low pour points and lack of paraffins (wax) make these good all-season lubricants well-suited for high and low temperature extremes. At high temperatures and pressures, AMSOIL AW Series Oils provide a good lubricating film and protect components against wear. During cold-temperature operation, equipment starts easier and the need for preheating with sump heaters is reduced. The AW Series ISO 32 base oils also readily separate from water, preventing oil/water emulsions that inhibit lubrication and allowing for longer lubricant life and easier water drainage from the sump.

Download Product Data Bulletin

Performance Features

  • Antiwear protection for high-pressure systems
  • Recommended for gear, vane and piston pumps
  • Contain rust, oxidation and foam inhibitors
  • Designed for extreme-temperature operation
  • Hydrolytically stable and readily separate from water

Application Recommendation

The correct viscosity grades of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operations where temperature extremes are encountered.

AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils and most synthetic hydraulic oils*. For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.

* Not compatible with phosphate ester, silicone or water-based fluids.

AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:

  • Denison HF-0, HF-1 and HF-2
  • Vickers M-2950-S and I-286-S
  • Cincinnati Milacron P-68, P-69 and P-70
  • U.S. Steel 127
  • Racine, variable volume vane pumps
  • DIN 51524, Parts 2 and 3 HLP22-HLP46
  • SEB 181222 HLP22-HLP68
  • ASTM D-6158 HV
  • AFNOR E 48-603*
  • Ford M6C32
  • GM LH-04-1, LH-06-1 and LH-15-1
  • Lee Norse 100-1
  • Jeffrey No. 87
  • BF Goodrich 0152
  • Commercial Hydraulics*

* Except for PM-500 series silver-containing pumps which require R&O additive systems.

AMSOIL PRODUCT AVAILABILITY

AMSOIL industrial lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special-order products based on customer requests and regional demands.

Buy in the Omaha store at 84th & G or use this Online link to the Amsoil sale page if you are outside of the area.

AMSOIL PRODUCT WARRANTY

AMSOIL products are backed by a Limited Liability Warranty. For complete information AMSOIL Warranty Information.

AMSOIL Synthetic Anti-Wear (AW) Hydraulic Oil, ISO-32 (AWH)
ISO Viscosity Grade (ASTM D2422) 32
Viscosity @ 100°C, cSt (ASTM D445) 7.4
Viscosity @ 40°C, cSt (ASTM D445) 33.1
Viscosity Index (ASTM D2270) 200
Specific Gravity, g/mL (ASTM D1298) 0.8453
Density, lb/gal (ASTM D1298) 7.038
Flash Point °C (°F) (ASTM D92) 228 (442)
Fire Point °C (°F) (ASTM D92) 248 (478)
Pour Point °C (°F) (ASTM D97) <-51 (<-60)
Four-Ball Wear Test (ASTM D4172) (40 kg, 1200 rpm, 75°C, 1 hr) 0.45
Copper Strip Corrosion Test (ASTM D130) 1A
Foam Tendency, Seq. I, II, III (ASTM D892) 0/0, 0/0, 0/0
Dielectric Strength, voltage, kV AC  (ASTM D877) 46.2
Demulsibility (ASTM D1401) 40-40-0 (10)
Rust Test (ASTM D665 A & B)
Fresh Water and Synthetic Sea Water