SABER® Professional Synthetic 2-Stroke Oil
One Oil Covers All Mix Ratios
Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on hand-held power equipment such as chainsaws and lawn/utility equipment.
An Omaha favorite! We have gained a LOT of business thanks to AMSOIL’s 2nd oldest product. Power equipment, scooters, dirtbikes, ATVs and even under racing use. Yes – this goes back to 1973 and has been tested by a 3rd party standards lab (SWRI) to pass the same required test only at 300:1!! Omaha landscapers rely on this one for their equipment dependability.Buy Online
JASO FD, ISO-L-EGD, API TC
While two-stroke engines are widely used in handheld power equipment due to their high power-to-weight ratio, equipment owners and operators are faced with exhaust smoke, the task of properly mixing oil and gas for different equipment manufacturers, and premature wear and engine failure. AMSOIL SABER® Professional Synthetic 2-Stroke Oil effectively addresses these issues and more. Specially formulated for pre-mix, air-cooled applications, it withstands high heat and stress to protect engines against wear and harmful deposits. SABER Professional offers outstanding protection and performance at lean mix ratios referred to as the SABER Ratio™. Using the SABER Ratio eliminates the need for mixing different ratios for different equipment, while smoke is virtually undetectable. With AMSOIL SABER Professional, there is no compromise. It saves time and money while delivering the ultimate convenience and engine protection.
AMSOIL Synthetic 2-Stroke Oil has been providing improved performance and protection in two-stroke engines since 1973. Trust the extensive experience of AMSOIL, The First in Synthetics®, to do the best job protecting your engine.
SABER Professional has been tested and proven to provide premium protection and performance at 100:1 mix ratios. It is recommended for any mix ratio up to 100:1. When tested at half the treat rate for conventional oils (100:1 vs. 50:1), SABER Professional easily passed the industry-standard lubricity test. SABER Professional is designed for hot-operating two-stroke engines, effectively fighting carbon/deposit formation and preventing ring sticking.
SABER Professional’s synthetic formulation burns clean, passing the industry-standard smoke test at the standard rich mix ratio. When mixed at the SABER Ratio, smoke is virtually undetectable. Equipment operators subjected to smoke and fumes benefit from these low-emission properties.
SABER Professional provides the additional benefit of fuel stabilization to help prevent fuel from deteriorating during storage and causing poor engine performance. There is no need to add an additional fuel stabilizer when putting equipment into seasonal storage.
- Excellent lubricity and cleanliness properties
- Controls friction and helps prevent wear, plug fouling, ring sticking and exhaust port blocking
- Smokeless – delivers fewer emissions at 80:1 and 100:1 mix ratios.
- Stabilizes fuel for off-season storage
- Delivers outstanding protection and performance at lean mix ratios
- Anti-rust formulation counteracts the damp environments often encountered in two-stroke applications
SABER Professional is specifically designed for handheld pre-mix two-stroke power equipment including, but not limited to, chainsaws, trimmers, blowers, brush cutters, edgers and shredder vacs.
Use at conventional mix ratios or the SABER® Ratio,™ regardless of the mix ratio specified for the equipment. For maximum benefit, use the SABER Ratio.
|Conventional||32:1||4.0 OZ||1 U.S. gallon|
|Conventional||40:1||3.2 OZ||1 U.S. gallon|
|Conventional||50:1||2.6 OZ||1 U.S. gallon|
|SABER® Ratio™||80:1||1.6 OZ||1 U.S. gallon|
|SABER® Ratio™||100:1||1.3 OZ||1 U.S. gallon|
Buy in the Omaha store at 84th & G or use this Online link to the Amsoil sale page if you are outside of the area.
For warranty information, visit AMSOIL Warranty Information